USEFUL INFO
Downloads
Contact Us
Please click here to confirm the pre-requisite requirements to undertake assessments.
- Assessment Code
- Assessment Summary
- CCN 1
- A full core assessment intended for operatives who carry out installation and maintenance work on pipework, appliances and equipment on domestic natural gas installations.
- CENWAT
- An assessment to extend an operatives scope of work to include the installation and maintenance of domestic gas fired central heating boilers / hot water circulators/Instantaneous water heaters.
- CKR 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of domestic gas fired cookers.
- HTR 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of domestic gas fired space heaters (including gas fires and wall heaters).
- WAT 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of domestic gas fired instantaneous water heaters.
- DAH 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of domestic gas fired warm air heating appliances.
- LAU 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of domestic gas fired tumble dryers.
- CPA 1
- An assessment to extend an operatives scope of work to include combustion analysis of domestic gas appliances when commissioning ,re-commissioning or completing repairs.
- MET 1
- An assessment to extend an operatives scope of work to include the installation, exchange and disconnection of domestic gas meters (see also REGT 1).
- REGT 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of medium pressure meter regulators associated with domestic gas meters (see also MET 1).
- Assessment Code
- Assessment Summary
- DGA
- A Domestic Gas Safety Assessment for Gas Operatives in the Republic of Ireland.
- Assessment Code
- Assessment Summary
- COCN 1
- A full core assessment intended for operatives who carry out installation and maintenance work on pipework, appliances and other plant / equipment on industrial and commercial premises. This is a prerequisite to all other Non Domestic Gas assessments.
- CoDNCO 1
- A changeover core assessment for an operative who already holds domestic core assessment CCN 1. and intends to extend their scope of work to include carrying out installation and maintenance work on pipework, appliances and other plant / equipment on industrial and commercial premises.
- ICPN 1
- An assessment to extend an operatives scope of work to include steel, copper and polyethylene pipework and fittings.
- TPCP 1
- An assessment to extend an operatives scope of work to include soundness testing & purging of all pipework systems in accordance with IGE/UP1.
- TPCP 1A
- An assessment to extend an operatives scope of work to include soundness testing & direct purging of small pipework systems in accordance with IGE/UP1A.
- CIGA 1
- An assessment to extend an operatives scope of work to include the installation, commissioning and maintenance of INDIRECT fired heating appliances and equipment.
- CORT 1
- An assessment to extend an operatives scope of work to include the installation, commissioning and maintenance of overhead radiant heating appliances and equipment.
- CDGA 1
- An assessment to extend an operatives scope of work to include the installation, commissioning and maintenance of DIRECT fired heating appliances and equipment.
- CGFE 1
- An assessment to extend an operatives scope of work to include the installation, commissioning and maintenance of gas fuelled ignition engines.
- CBHP 1
- An assessment to extend an operatives scope of work to include the installation, commissioning and maintenance of gas boosters / compressors & high pressure pipework.
- Assessment Code
- Assessment Summary
- CCCN 1
- A full core assessment intended for operatives who carry out installation and maintenance work on pipework, appliances and equipment on commercial catering natural gas installations.
- COMCAT 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of commercial catering appliances.
- COMCAT 2
- An assessment to extend an operatives scope of work to include the installation and maintenance of commercial catering appliances.
- COMCAT 3
- An assessment to extend an operatives scope of work to include the installation and maintenance of commercial catering appliances.
- CoDC 1
- A changeover core assessment for an operative who already holds domestic core assessment CCN 1. and intends to extend their scope of work to include carrying out installation and maintenance work on pipework, appliances and equipment on commercial catering natural gas installations.
- CoCATA 1
- A changeover assessment for an operative who already holds domestic core assessment CCN 1. and changeover assessment CoDC 1. and intends to extend their scope of work to include the installation and maintenance of commercial catering appliances.
- Assessment Code
- Assessment Summary
- MET 4
- An assessment to extend an operatives scope of work to include the installation, exchange and removal of diaphragm gas meters with a range of >6m3/hr to 40m3/hr, with a 75 mbar maximum inlet pressure.
- CMET 1
- An assessment to extend an operatives scope of work to include the installation, exchange and removal of diaphragm and rotary positive displacement gas meters with a range of >6m3/hr to 1076m3/hr, with a 75 mbar maximum inlet pressure.
- CMET 2
- An assessment to extend an operatives scope of work to include the installation, exchange and removal of diaphragm, rotary positive displacement and turbine gas meters (not covered by CMET 1) for pressures 7 bar (CMET 1 is a prerequisite to this assessment).
- REGT 2
- An assessment to extend an operatives scope of work to include the installation, commissioning and maintenance of medium pressure meter regulators associated with non domestic gas meters (use with MET 4/CMET 1).
- CMIT 1LS
- An assessment to extend an operatives scope of work to include limited gas work on meter instrumentation for gas meters with a range >6m3/hr, operating at pressures not exceeding 75 bar.
- CESP 1 & / or CMA 1
- A full core assessment intended for operatives who carry out installation and maintenance work on meters on domestic, industrial and commercial premises and for operatives who undertake work for an emergency service provider.
- CoDNESP 1
- A changeover core assessment for an operative who already holds CCN 1. and intends to extend their scope of work to include carrying out installation and maintenance work on meters on industrial and commercial premises and for operatives who undertake work for an emergency service provider.
- MET 2
- An assessment to extend a meter operatives scope of work to include the installation, exchange and disconnection of domestic gas meters (see also REGT 1).
- REGT 1
- An assessment to extend an operatives scope of work to include the installation and maintenance of medium pressure meter regulators associated with domestic gas meters (see also MET 2).
- CMA 2LS & MET 3LS
- A full core assessment and associated module intended for operatives who carry out installation of meters on domestic premises (NOT connected to installation pipework / appliances).
- Assessment Code
- Assessment Summary
- CoNGLP 1PD
- A changeover core assessment for an operative who already holds a core gas safety assessment and intends to extend their scope of work to include carrying out installation and maintenance work on Liquefied Petroleum Gas pipework, appliances and equipment in Permanent Dwellings.
- CoNGLP 1LAV
- A changeover core assessment for an operative who already holds gas safety assessment CoNGLP 1. and intends to extend their scope of work to include carrying out installation and maintenance work on Liquefied Petroleum Gas pipework, appliances and equipment in Leisure Accommodation Vehicles (e.g. static and touring caravans).
- CoNGLP 1RPH
- A changeover core assessment for an operative who already holds gas safety assessment CoNGLP 1. and intends to extend their scope of work to include carrying out installation and maintenance work on Liquefied Petroleum Gas pipework, appliances and equipment in Residential Park Homes.
- CoNGLP 1B
- A changeover core assessment for an operative who already holds a gas safety assessment CoNGLP 1. and intends to extend their scope of work to include carrying out installation and maintenance work on Liquefied Petroleum Gas pipework, appliances and equipment in Boats.
- HTRLP 2
- An assessment to extend an operatives scope of work to include the installation and maintenance of closed flue gas fires installed in Leisure Accommodation Vehicles (e.g. Widney Fires).
- Assessment Code
- Assessment Summary
- UVHW 1
- Installation and Maintenance of Domestic Unvented Hot Water Storage Systems in accordance with Building Regulation Part G.
- EE 1
- Energy Efficiency for Domestic Heating Installers wishing to install and commission boilers in accordance with Building Regulation Part G and download to a suitable Register.
- LWT
- Legionella and water treatment course enables operative to test cold water storage systems for the presence of Legionella and take appropriate steps to treat the system.
- PTG
- Pathway to gas is an up-skilling course for those with experience in gas or allied trade but no qualifications this course requires the operative to build a portfolio of evidence along side a Gas Safe registered operative.
- Essential Electrics (ELEC 02)
- A basic electrics course for operatives who may need to undertake limited tasks e.g. fault finding where electrical isolation is be proved or for testing of components.(this is not suitable for joining a Part P Register).
- Water Regulations
- An Assessment on the Knowledge of the Water Supply (Water Fittings) Regulations 1999.
- Assessment Code
- Assessment Summary
- OFT 10 101
- An Assessment of Oil Fired Applinace Single Stage Pressure Jet Servicing and Commissioning.
- OFT 10 105E
- An Assessment of the Installation of oil and bio fuelled fixed combustion applinaces and systems.
- OFT 10 102D
- An Assessment of Servicing and Commissioning of oil fuelled Vaporising burner fired domestic fixed combustion appliances (Dry) < 45kW.
- OFT 10 102W
- An Assessment of Servicing and Commissioning of oil fuelled Vaporising burner fired domestic fixed combustion appliances (Wet) < 45kW.
- Assessment Code
- Assessment Summary
- OFT 10 600a
- An Assessment of the Installation of oil fuel storage and supply systems connected to fixed combustion appliances.
- Assessment Code
- Assessment Summary
- OFT 10 201
- An Assessment of Commissioning and Servicing of non-modulating multi-stage oil and bio-liquid fuelled pressure-jet burners connected to space and/or water heaters.
- Assessment Code
- Assessment Summary
- OFT 15 108D
- An Assessment of the Installation, Commissioning & Servicing of Solid Fuel Burning Appliances (Domestic Space Heating).
- OFT 15 108 W
- An Assessment of the Installation, Commissioning & Servicing of Solid Fuel Burning Appliances (Domestic Space and Water Heating).
- OFT 18 108S
- An Assessment for Servicing and Commissioning of Solid Fuel Burning Appliances (Domestic Space Heating)
Certificate Verification Withdrawn List
